Compact 460W plug-in solar kit (ground mount)

One kit per carton. At 41kg, plan two people to move each one. Pallet quantities and pallet weights are being confirmed with the maker.

Trade price: TBC. It will sit in the price tiers once trade terms are signed.

Panel power

1 × 460W

Output into your home

Up to 799VA (3.5A), 230V 50Hz

Panel

TOPCon N-type mono, bifacial glass-glass, 96 cells, 23.0% efficiency

Panel size

1762 × 1134 × 30mm

Panel weight

25.5kg

Space needed

1.9m × 1.2m (about 2.3m²)

Microinverter

APsystems EZ1-M 800W microinverter, 2 MPPT, 96.7% peak efficiency, IP67, Wi-Fi and Bluetooth app

Mounting

Ground mount only. Ballast not included

Cable

4m AC connection cable

Plug type

Factory-fitted, moulded and fused UK plug (BS 1363). Don't cut it off or rewire it

Box

1800 × 1180 × 180mm, 41kg

Fire rating

Class C

Standards

BS EN 50549-1, BS EN 62109-1, BS EN 62109-2, EN 755-1:2016, EN 755-2:2016

Where it's made

Assembled in the UK, with a UK-made mount. Some parts are made in China

ENA Type Test Register

Listed as Compliant (0.8kW, single phase)

Manufacturer's warranty

10 years on the panel and on the mounting stand. The APsystems microinverter has its own manufacturer's warranty. Cables, connectors and accessories: 2 years

From the maker's datasheet (September 2026).

• 1 × 460W TOPCon N-type panel (bifacial, glass-glass)
• 1 × APsystems EZ1-M 800W microinverter
• Ground mounting stand, attached (made in the UK)
• 4m AC connection cable

Ballast isn't in the carton. The maker's manual asks for dense concrete blocks of at least 18kg each on the stand's lower plates, both sides: 2 blocks where gusts can top 40mph, 5 above 60mph and 10 above 80mph. Coastal and exposed sites need the higher counts, so plan block quantities per address.

Cables sit on top of the blocks, never trapped under them, and no block rests on the microinverter.

Ground only: a lawn, patio, gravel area or yard floor with about 1.9m × 1.2m of level space. Not for walls, roofs or balconies; the maker's datasheet says it isn't suitable for balconies.

Each kit plugs straight into a weatherproof outdoor socket (at least IP55) within its 4m cable. The maker designs the kits for an outdoor socket fitted and certified by a qualified electrician, with modern RCD protection in the consumer unit. No extension leads, cable reels or adaptors.

Across the North East, registration at myplugin.solar notifies Northern Powergrid, the network operator, for each address.

Run through these at each address before the kit is allocated. If one can't be ticked, that address waits.

1. Written permission from the freeholder or managing agent where you don't own the freehold, and the tenant told before install day.
2. A weatherproof outdoor socket within 4m of the spot, and modern RCD protection in the consumer unit. An electrician can fit or check both.
3. Straight into the wall socket. No extension leads, cable reels or adaptors, and the factory plug is never cut off.
4. One kit only at that address, and never alongside a home battery.
5. Registered free at myplugin.solar before first use, against that address.
6. The building insurer told before the kit goes in.

Supply date to be confirmed

This line isn't on sale yet. Join the kit list and we'll email you when supply dates and trade prices are confirmed. For a portfolio or programme, request a priced proposal and we'll come back to you with the figures.

Kits go out from the NE13 yard, by van or wagon across the North East, or for collection at the trade counter once stock lands.