Max 1260W plug-in solar kit (hybrid mount)

One kit per carton. At 96kg, plan two people to move each one, and a tail-lift or forklift for pallets. Pallet quantities and pallet weights are being confirmed with the maker.

Trade price: TBC. It will sit in the price tiers once trade terms are signed.

Panel power

2 × 630W (1260W)

Output into your home

Up to 799VA (3.5A), 230V 50Hz

Panels

TOPCon N-type mono, bifacial glass-glass, 132 cells per panel, 23.3% efficiency

Panel size

2382 × 1134 × 30mm each

Panel weight

34kg each (68kg for both panels)

Space needed

5.0m × 1.2m (about 6.0m²)

Microinverter

APsystems EZ1-M 800W microinverter, 2 MPPT, 96.7% peak efficiency, IP67, Wi-Fi and Bluetooth app

Mounting

Hybrid aluminium mount, wall or ground (expansion bolts or ballast). Professional assessment for any install that isn't on the ground. Not suitable for balconies

Cable

4m AC cable

Plug type

Factory-fitted, moulded and fused UK plug (BS 1363). Don't cut it off or rewire it

Box

2410 × 1165 × 240mm, 96kg

Fire rating

Class C

Standards

BS EN 50549-1, BS EN 62109-1, BS EN 62109-2, EN 755-1, EN 755-2

Where it's made

China

ENA Type Test Register

Listed as Compliant (0.8kW, single phase)

Manufacturer's warranty

10 years on the panels and on the mounting stand. The APsystems microinverter has its own manufacturer's warranty. Cables, connectors and accessories: 2 years

From the maker's datasheet (September 2026).

• 2 × 630W TOPCon N-type panels (bifacial, glass-glass)
• 1 × APsystems EZ1-M 800W microinverter
• Hybrid aluminium mounting frame with ballast brackets, for a wall or the ground
• 4m AC cable

Ballast isn't in the carton. On the ground, the hybrid frame is held with expansion bolts or ballast on its lower feet. The maker's manual says the ballast must suit the spot and its wind, and the ground-mount ballast table doesn't apply to this frame. Ask us and we'll get the maker's figure before any kit goes out ballasted.

The frame sets up on level ground (about 5.0m × 1.2m) or fixes to a solid house wall. The maker requires a professional assessment before any wall, flat-roof or raised install, so book that per property before fixings go in.

Out of bounds for every kit

• balconies (the maker's datasheet says not suitable for use on balconies)
• walls on a property boundary, including walls shared with a neighbouring home
• buildings with timber, ACM, MCM or HPL cladding, or under external wall remediation
• fixings with cable ties, rope, straps or tape

In England, a wall-mounted kit mustn't stick out beyond the set limits, can't go on a street-facing wall in a conservation area, and isn't allowed on a listed building. In Scotland and Wales, check with the council.

Each kit plugs straight into a weatherproof outdoor socket (at least IP55) within its 4m cable. The maker designs the kits for an outdoor socket fitted and certified by a qualified electrician, with modern RCD protection in the consumer unit. No extension leads, cable reels or adaptors.

More than 960W of panels. The government's product specification says that above 960W, users should consider a professional assessment of their electrical installation. Allow for an electrics check at each address.

Across the North East, registration at myplugin.solar notifies Northern Powergrid, the network operator, for each address.

Run through these at each address before the kit is allocated. If one can't be ticked, that address waits.

1. Written permission from the freeholder or managing agent where you don't own the freehold, and the tenant told before install day.
2. A professional assessment first if the frame is going on a wall, a flat roof or anything raised.
3. A professional check of the electrics: this kit has more than 960W of panels.
4. A weatherproof outdoor socket within 4m of the spot, and modern RCD protection in the consumer unit. An electrician can fit or check both.
5. Straight into the wall socket. No extension leads, cable reels or adaptors, and the factory plug is never cut off.
6. One kit only at that address, and never alongside a home battery.
7. Registered free at myplugin.solar before first use, against that address.
8. The building insurer told before the kit goes in.

Supply date to be confirmed

This line isn't on sale yet. Join the kit list and we'll email you when supply dates and trade prices are confirmed. For a portfolio or programme, request a priced proposal and we'll come back to you with the figures.

Kits go out from the NE13 yard, by van or wagon across the North East, or for collection at the trade counter once stock lands.